ASTM D4214 评估外墙涂料涂层的粉化程度标准测试

ASTM D4214-07 Method B  Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films ASTM D4214-07 Method B 评估外墙涂料的粉化程度涂层的标准测试方法 Scope: 1.1 These test methods cover the evaluation of the degree of chalking on white or tinted exterior paint films. These test methods describe the procedures recommended for […]

ISO 4628-6 色漆和清漆涂层降解评定-第6部分:评定粉化等级

ISO 4628-6:2007 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method ISO 4628-6:2007 色漆和清漆–涂层降解的评定–外表均匀变化强度以及缺陷的数量和大小的规定–第6部分:用胶带法评定粉化等级

ISO 4628-5 色漆和清漆剥蚀评定-第5部分:剥落程度规定

ISO 4628-5:2003(剥落程度) Paints and varnishes; Evaluation of degradation of paint coatings; Designation of intensity, quantity and size of common types of defect,and of intensity of uniform changes in appearance- Part 5 : Assessment of degree of flaking ISO 4628-5:2003(剥落程度) 色漆和清漆.色漆涂层剥蚀的评定一般性缺陷的程度、数量大小的规定.表面统一变化强度.第5部分:剥落程度的规定

ISO 4628-4 色漆和清漆剥蚀评定-第4部分:裂纹程度评定

ISO 4628-4:2003(裂纹程度) Paints and varnishes; Evaluation of degradation of paint coatings; Designation of quantity and size of defect,and of intensity of uniform changes in appearance- Part 4 : Assessment of degree of cracking ISO 4628-4:2003(裂纹程度) 色漆和清漆.色漆涂层剥蚀的评定.一般性缺陷程度、数量大小的规定.表面统一变化强度.第4部分:裂纹程度的评定

ISO 4628-3 色漆和清漆剥蚀评定-第3部分:氧化程度的评定

ISO 4628-3:2003(腐蚀程度) Paints and varnishes; Evaluation of degradation of coatings; Designation quantity and size of defect, and of intensity of uniform changes in appearance- Part 3 : Assessment of degree of rusting ISO 4628-3:2003(腐蚀程度) 色漆和清漆.色漆涂层剥蚀的评定.缺陷的一般型式程度数量和大小的规定.表面统一变化强度.第3部分:氧化程度的评定

ISO 4628-2 色漆和清漆-漆膜降解评定-第2部分:起泡等级的评定

ISO 4628-2:2003(起泡程度) Paints and varnishes – Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 2: Assessment of degree of blistering ISO 4628-2:2003(起泡程度) 色漆和清漆.漆膜降解的评定.缺陷量值、大小和外观均匀改变程度的规定.第2部分:起泡等级的评定

ASTM D2457 塑料薄膜和固体塑料镜面光泽标准测试

ASTM D2457-08 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics ASTM D2457-08 塑料薄膜和固体塑料镜面光泽的标准测试方法 Scope: 1.1 This test method describes procedures for the measurement of gloss of plastic films and solid plastics, both opaque and transparent. It contains four separate gloss angles (Note 1): 1.1.1 60-deg, recommended for […]